TTK-9

Specifications: Aerospace, Medical, Wire Cutting

  • Average Grain Size: 2 Micron
  • Hardness: 90 Shore
  • Flex Strength: 13,300 psi
  • Resistivity: 709 ohm/in.
  • Maximum Block Size: 5.9″ x 16″ x 27.6″
  • Method of Manufacture: Molded

TTK-4C

Specifications: Aerospace, Medical, Wire Cutting, Blow Molds, Plastic Injection Molds, Punches & Dies

  • Average Grain Size: 4 Micron
  • Hardness: 60 Shore
  • Flex Strength: 15,500 psi
  • Resistivity: 100 ohm/in.
  • Maximum Block Size: 2″ x 8″ x 12″
  • Method of Manufacture: Impregnated

TTK-4

Specifications: Aerospace, Medical, Wire Cutting, Blow Molds, Plastic Injection Molds, Punches & Dies

  • Average Grain Size: 4 Micron
  • Hardness: 72 Shore
  • Flex Strength: 10,600 psi
  • Resistivity: 552 ohm/in.
  • Maximum Block Size: 8.3″ x 20″ x 37.3″
  • Method of Manufacture: Molded

TTK-5

Specifications: Aerospace, Medical, Wire Cutting, Blow Molds, Plastic Injection Molds, Punches & Dies

  • Average Grain Size: 4 Micron
  • Hardness: 80 Shore
  • Flex Strength: 11,600 psi
  • Resistivity: 610 ohm/in.
  • Maximum Block Size: 8.3″ x 20″ x 37.3″
  • Method of Manufacture: Molded

TTK-50

Specifications: Die Cast, Powder Metal Molds, Forging Dies, Blow Molds, Plastic Injection Molds, Punches & Dies

  • Average Grain Size: 8 Micron
  • Hardness: 70 Shore
  • Flex Strength: 8,700 psi
  • Resistivity: 512 ohm/in.
  • Maximum Block Size: 11.4″ x 23.6″ x 39.4″
  • Method of Manufacture: Molded

ISO-63

Specifications: Die Cast, Powder Metal Molds, Forging Dies, Blow Molds, Plastic Injection Molds, Punches & Dies

  • Average Grain Size: 5 Micron
  • Hardness: 76 Shore
  • Flex Strength: 9,400 psi
  • Resistivity: 590 ohm/in.
  • Maximum Block Size: 9″ x 21.5″ x 39.5″
  • Method of Manufacture: Molded

ISEM-8

Specifications: Die Cast, Powder Metal Molds, Forging Dies, Blow Molds, Plastic Injection Molds, Punches & Dies

  • Average Grain Size: 8 Micron
  • Hardness: 63 Shore
  • Flex Strength: 7,540 psi
  • Resistivity: 528 ohm/in.
  • Maximum Block Size: 12″ x 24.4″ x 47.2″
  • Method of Manufacture: Molded

ISEM-2

Specifications: Die Cast, Powder Metal Molds, Forging Dies, Punches & Dies

  • Average Grain Size: 10 Micron
  • Hardness: 55 Shore
  • Flex Strength: 6,000 psi
  • Resistivity: 433 ohm/in.
  • Maximum Block Size: 12″ x 24″ x 39.4″
  • Method of Manufacture: Molded